NUGEN Stereoplacer > Stereoplacer V3 UPG

• Fix poor recordings
• Ideal for restoration
• Reposition complex audio
• Reconstruct mono image
• Dynamic visual feedback
• Harmonic capture

Flexible controls

With fully adjustable curves (bell, high and low shelving and even additional linked-harmonic overtones) you can redistribute stereo information with subtlety, or make powerful corrections – even moving hard-panned frequencies from one side to the other – without affecting the overall level balance of the material.

With each node it is possible to add a number of additional harmonically linked bell curves, all referenced from the one ‘root’ control point.

‘Panning’ the bass

Sometimes a mix calls for a bass element, say the bass guitar track, to be panned away from the centre. Often this is best avoided as off-centre high energy in the low frequencies can create more problems than it resolves. Using Stereoplacer, however, the low frequencies can be kept in the centre whilst higher frequencies (i.e. the attack component) are moved across the stereo field with a shelving band. This gives the impression that the bass part has been panned, when really only the high, directional frequencies have been affected.

You can also achieve the opposite effect, pulling stray low frequencies back into the centre without affecting the entire sound.

For mixing and sound design

Use Stereoplacer for panning sounds without affecting their low end, fixing poor microphone placement and moving problem frequencies as an alternative to EQ. Adjust the position of sounds in sample loops and gain detailed control of harmonically complex sounds, tackling problems introduced by heavy processing. All with superb mono-compatibility.

For post production and restoration

Re-position specific elements or achieve gentle linear phase adjustment of your entire mix. Extrapolate and re-balance poorly positioned instruments whilst leaving the rest of the soundfield intact. You can even add stereo detail to previously mono recordings, leaving the original character intact.

Presets

Setting up Stereoplacer is rather like setting up an EQ and is almost entirely dependent upon the source audio. As a result, there are no factory presets installed by default. However, there is scope to create custom presets for users who are repeatedly encountering similar mix problems.

Typical applications

• Panning sounds in sample loops
• Fixing poor microphone placement
• Shifting problem frequencies
• Double tracking stereo distribution
• Extrapolating poorly panned sounds